Ms. YUKA Filtration
¿Qué puedo hacer por ti?
$64.661-19 Piece/Pieces
$61.42≥20Piece/Pieces
| Tipo de Pago: | T/T,L/C |
| Incoterm: | CIF,EXW,CFR,FOB |
| transporte: | Land,Ocean,Air,Express |
| Hafen: | Shenzhen,Guangzhou,Shanghai |
Sombra:
Modelo: HFD010
Material: Aluminum Alloy
Housing Serve Lige: 15 Years
Element Serve Life: 4000~6000 Hours
Filtration Performance: From 5 μm To 0.01μm
Maxi. Operate Pressure: 1.6mpa
Operate Temperature: 1.5~80ºc
Resistance Corrosion: Inside And Outside
Configuration: Stainless Steel Manual Ball Valve
Unique Lock Design: Available
Parallel Design: Yes
Wall Connection Kit: Yes
Color: Light Blue
Filter Element: Top & Bottom Cap With Stainless Steel
Trademark: Yuka
Transport Package: Brown Inner Box & Cardboard
Origin: China
HS-Code: 8421399090
Clapboard: Without Clapboard
Filter Number: 1
Medium Material: Fiberglass
Efficiency: F5
Filtration Grade: Medium Filter
Type: Cartridge Filter
Connection: Rc1/2"
Flow Rate: 1.0m³/Min
Specification: Dimension: 90 X 82 X 255 Mm
| Unidades de venta | : | Piece/Pieces |
| Tipo de paquete | : | Cartón Boc |
| Ejemplo de una imagen | : |
|
The file is encrypted. Please fill in the following information to continue accessing it
Característica y beneficio
Presión de funcionamiento: 1,6 Mpa
Caudal: 1,0 a 7,2 m³ / min (hasta ahora)
Tasa de filtración: 5μm / 1μm / 0.1μm / 0.01μm
Material: aleación de aluminio.
Diseño de bloqueo único, para garantizar un fácil mantenimiento y hermeticidad.
Disponible kit de conexión en paralelo y en pared.
Eliminación de contaminantes de alta eficiencia
Nuestro filtro de presión media y alta cuenta con medios de fieltro y fibra de vidrio de eficiencia para maximizar la filtración de polvo seco y húmedo, partículas, sólidos en suspensión de aceite y gotas de agua. Minimice la caída de presión y mantenga los costos de operación económicos.
Estanqueidad superior al aire
Diseño de bloqueo único, fácil de reemplazar y mantener.
Evite la segunda contaminación
Interior y exterior con anticorrosión, con válvula de bola manual de acero inoxidable.
Presión diferencial baja
El diseño de flujo optimizado y el uso de materiales filtrantes sirven para mantener la presión diferencial a un nivel bajo constante durante toda la vida útil del elemento sin comprometer su capacidad de retención de suciedad.
Diseño de alta tecnología
Es claramente visible debido a los bordes en la cabeza del filtro de la entrada de aire comprimido para garantizar una conexión confiable entre las carcasas de filtro izquierda y derecha y las partes de la carcasa de filtro izquierda y derecha durante el proceso de ensamblaje.
El aire comprimido proporciona una velocidad de aire suave y no turbulenta cuando ingresa al elemento filtrante.
| PF | AO | AA | AX | ACS | AR | AAR |
| As a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligible | High efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³ (21℃）,1ppm(w). | High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21℃),0.01ppm(w) | Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21℃),0.001ppm(w) | Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21℃)，0.003ppm（w） | Dust particles whose diameter more than 1μm can be removed | Dust particles whose diameter more than 0.01μm can be removed |
Especificaciones del producto
| Model） | Pipe size | Flow rates | Dimension (mm) | ||||||
| L/S | m³/min | scfm | W (Width) | D (Depth) | H (Height) | A | B | ||
| HFD010 | RC1/2" | 16.7 | 1.0 | 35.3 | 90 | 82 | 255 | 37 | 179 |
| HFD020 | RC3/4" | 25.0 | 1.5 | 53.0 | 90 | 82 | 255 | 37 | 179 |
| HFD030 | RC3/4" | 30.0 | 1.8 | 63.6 | 90 | 82 | 286 | 37 | 212 |
| HFD040 | RC1" | 33.3 | 2.0 | 70.6 | 90 | 82 | 286 | 37 | 212 |
| HFD050 | RC3/4" | 46.7 | 2.8 | 98.9 | 120 | 113 | 359 | 53 | 269 |
| HFD060 | RC1" | 60.0 | 3.6 | 127.1 | 120 | 113 | 359 | 53 | 269 |
| HFD070 | RC1" | 80.0 | 4.8 | 169.5 | 120 | 113 | 459 | 53 | 369 |
| HFD080 | RC1-1/2" | 120.0 | 7.2 | 254.2 | 120 | 113 | 459 | 53 | 369 |
| Technical requirements | Maximum operating pressure: 16 barg Maximum operating temperature: 80°C Minimum operating temperature:1.5°C | ||||||||
| Pressure | Barg | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| Psig | 15 | 29 | 44 | 59 | 73 | 87 | 100 | 116 | 131 | 145 | 160 | 174 | 189 | 203 | 219 | 232 | |
| Correction factor | 0.38 | 0.53 | 0.65 | 0.76 | 0.85 | 0.93 | 1.00 | 1.07 | 1.13 | 1.19 | 1.23 | 1.31 | 1.36 | 1.41 | 1.46 | 1.51 | |
Sobre Nosotros
Contáctenos
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now